Monel 400 has corrosion resistant properties against flowing sea-water and is extensively used for marine applications. Alloy 400 is also extremely resistant to stress corrosion cracking in most freshwaters. Alloy 400 is used in steam generators, feedwater heaters, cladding of offshore installations, pump and propeller shafts, marine fixtures and...

Monel K-500 is a nickel-copper super alloy with characteristics and corrosion resistance same as the Alloy 400. Due to the addition of aluminum and titanium Alloy K-500 offers greater strength and hardness than Alloy 400.Monel K-500 SpecificationGradeUNSW.NrAlloy K500N055002.4375Monel K-500 Chemical compositionGrade%NiCuAlTiFeMnSCSiMonel...

Hastelloy  X has exceptional strength and oxidation resistance up 1200℃. And it has been found exceptionally resistant to stress-corrosion cracking in petrochemical applications. Alloy X is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres.Hastelloy X...

Iron-chromium-aluminium (FeCrAl) alloysFeCrAl alloys are characterized by excellent oxidation resistance and very good form stability resulting in long element life. They are typically used in electrical heating elements in industrial furnaces and home appliances.FeCrAl alloys have higher service temperature then NiCr Alloys and much lower prices....

Iron-chromium-aluminium (FeCrAl) alloysFeCrAl alloys are characterized by excellent oxidation resistance and very good form stability resulting in long element life. They are typically used in electrical heating elements in industrial furnaces and home appliances.FeCrAl alloys have higher service temperature then NiCr Alloys and much lower prices....

alloy 59 (UNS N06059) having a typical chemical composition of 59% nickel, 23% chromium, 16% molybdenum and iron levels of less than 1%, appears to have fulfilled this need.alloy 59 have shown excellent resistance to localized corrosion, hydrogen embrittlement and stress corrosion cracking while possessing very high strength, ductility, fracture...

904L is a high-alloy austenitic stainless steel with low carbon content. 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid.904L SpecificationUNSW.NrN089041.4539904L Chemical...

Alloy 90 is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creepresisting alloy for service at temperatures up to 920°C(1688°F).The alloy is used for turbine blades, discs, forgings, ring sections and hot-working toolsNimonic 90...

Alloy 20 is a highly alloyed austenitic stainless steel developed primarily for use in the sulfuric acid related processes. Alloy 20 is used is a wide variety of applications from Sulfuric acid pickling tanks, racks and heating coil, Heat Exchangers, Process piping, Chemical and petroleum process equipment etc.Alloy 20...

AWSClassificationUNSNumberWeight PercentCMnFePSSiCuNiCoAlTiCrNb(Cb) Plus TaMoVWOther  ...